The features of the ST-MDC control
1. Simple wiring: input dc motor can run programmatically;
2. Periods of control program: it can realize continuous forward,continuous reverse, continuous positive & nagetive, Five period ofmovement control mode can be realized;
3. Upper machine communication, through RS232 serial portcommunication, realize the PC computer and control communications.It can be realize multistratum control and speed setting by changingthe machine's settings through the computer;
4. External control signal input and output; It can Support 3 signalinput, 3 Signal output: easy to accept external models of input andoutput, such as switches, optoelectronic switch, electromagnetic valveControl, etc;
5. Small size: small volume, only as big as the motor appearance, noneed complicated Electric control box, it can work by imput DC powersupply;
6. Embedded process: the process use ARM chip, can be embeddedsecondary development for users. Realize the user's different controlfunction without comprehensive html. Save the cost of softwaredevelopment;
7. Support external LCD screen: color screen can easily realizeexternal data show, making users' products more upscale.
8. Low cost: the product is the best in the same products. It simplify thecomplex design and programming so that greatly reduced cost.
Lead port instructions
电源输入引线端口 | |
红/白+ | 直流5~24V正极 |
绿/白- | 直流负极 |
控制输入引线信号 | |
红（黑） | 红为控制公共端口正极，或黑为公共端口负极 |
黄 | 点动正转 |
绿 | 点动反转 |
棕 | 定长正转 |
橙 | 定长反转 |
白 | 编程模式运行（控制程序可按客户要求定制） |
蓝 | 停止 |
输出信号引线端口：按客户要求定制 |
RS232 RS485 port intructions
端子号 | 符 号 | 名 称 | 说 明 |
1 | A | RS485数据端A | |
2 | +5V | 电源正端+5V | 仅供外部手操器 |
3 | TxD | RS232发送端 | |
4 | GND | 电源地 | 0V |
5 | RxD | RS232接收端 | |
6 | B | RS485数据端B |
图2RS232、485接口引脚排列定义
ST-MDC42H电机驱动控制外形图
Dimensions(外形图): unit=mm
ST-MDC57H电机驱动控制外形图
Dimensions(外形图): unit=mm
ST-MDC86H 电机驱动控制外形图
Dimensions(外形图): unit=mm